Designed for occasions that require high-quality display of multiple video screens, it provides an ideal set of realistic solutions for applications in command centers, video conferences, multimedia multi-function halls, and other places.

Features:

·2 channel HD video signal input: HDMI (DVI);

·All the way high-definition video signal output: HDMI (or DVI);

·Stable adjustment of input signal window size and arbitrary window roaming;

Support the highest image resolution of 1920*1200@60Hz and comply with all conventional standards of VESA and HDTV;

·Control mode: RS422

·Modular design: It can be expanded according to customer needs, 4 channels, 8 channels, 16 channels...

·With power cut, over current, over voltage and over heat protection functions to ensure the normal operation of equipment and improve product reliability;

· With power saving function, fully comply with national energy saving requirements;

· Predefined multiple display modes

· User-defined display mode

Input interface

Channel 1 (Channel 1), Channel 2 (Channel 2)

Output interface

HDMI supports 1080P 60HZ, 1080P 30HZ, 1080P 25HZ, 720P, 1024*768 and other resolution output.

Control interface

RS422

Custom mode

The system can define its own display mode according to the needs of users

The position and size of the channel display can be changed, and the operation is simple and convenient.

Software control

This software runs on the PC side and is used to control high-definition video synthesizer terminal equipment. The use of this software requires the necessary authorization to run.

1. Operating platform

Window system, display resolution above 1024x768, requires serial device. Some PCs do not have serial port devices, and can use USB to COM port devices.

1. Software

1. Main menu operation

2.3.1 Synthesis mode settings

Select the number of synthesized windows in the Wind Number on the Control page, and a list of fixed synthesis modes corresponding to the number of windows appears.

Click the Synthesis Mode button

3.2 Super enter menu is provided to engineering installation and debugging personnel

Enter the password you got, and some debugging functions will appear.

3.3 Right-click menu

3.3.1 Select a unit input signal source, click the right mouse button to display the right-click menu, select Souce select

3.3.2 Select the signal source of the image window

Select the window number, right click to bring up the menu, select SOURCE SELECT

Select the corresponding signal source

3.3.3 Select channel

Select the corresponding image window number, right click, select Channel, select the corresponding Channel

3.3.4 User-defined window selection

Check the channel number of User define, the corresponding square appears, as long as the window is selected, the position can be dragged and the size can be changed.

3.4 Property Page

This page is a message returned by the lower computer synthesis system, and you can send commands to the system through Command

3.4.4Image

This page adjusts some image parameters. When a channel on the left is selected, it controls the video signal parameters of this channel.

3.5 Control buttons

Refresh: update the value of the current page,

Refresh All: Update the values of all pages,

Connect: Connect to the system. When the system is connected, this button becomes Disconnect

Port Setup: serial port settings

Here you need to set the correct COM port baud rate to 19200 and the stop bit to 1 according to the serial port used by the control computer

3.6 Status Bar

The left side is the progress bar. When there is an operation, the progress of the current operation is displayed. It is best not to perform the next operation during the operation. The next operation can only be performed after the current operation is completed.

The one on the right shows the currently connected turntable, which indicates the COM port baud rate used and whether it has been connected to the system